Build a Power Module to your Specification

Design a module

Step 1 – Select the number of power sockets you require.

We can supply the following power sockets;

  • Standard UK (Fused or Unfused)
  • UK T-earth
  • French/Belgian
  • German (Schuko)
  • Swiss
  • American
  • Indian (6A or 16A)

Under BS6396 : 2022, no more than 6 UK power sockets individually fused at 3.15A or 4 UK Power sockets individually fused should be specified.

Step 2 – Decide if you need a 2A or 4A 2 port USB power supply / charging module.

These twin port USB chargers are for charging only. There is no connection made to a computer. If you require data transfer, goto Step 3.

Step 3 – Decide if you need data and/or media sockets.

These are now available as in line / rear access keystone connectors so data cables are now sold separately. Options include;

  • RJ45 (CAT6 or CAT6A)
  • LJ6C
  • USB (data transfer)
  • HDMI
  • VGA
  • DVI
  • Display Port
  • 3.5mm Mini Jack
  • Phono
  • S-Video

Supplying separate data cables gives greater flexibility when connecting the module to a building’s infrastructure (ie via a data connection in a floor box). All you need to do is select the type and length of cable required and plug it into the back of the module.

Step 4 – Select the type of power lead you require.

Each module comes with a pre-wired 1m power lead that terminates with a male Wieland GST connector. All you need to do is decide how you are going to connect the module to your under desk power supply. There are two options:

  • Male-End-GST-PlugA power lead that connects the module into an under desk power module using the GST Wieland 3 pole connector. This option is supplied as a standard because it is the most common method of connecting an on desk module into an under desk module.

13A-UK-Plug

  • A power lead that connects the module into an under desk power module using a standard 13A UK plug.

If you require the unit to plug into a power supply using a standard 13A UK plug you will need to order an additional connector lead. This connector lead has a female Wieland GST connector at one end and a standard 13A UK plug on the other. This can be connected to the male Wieland GST connected that is pre-wired to your module to convert it to a standard 13A UK plug.

Need assistance

If you are looking for something that isn’t listed call our dedicated Technical Sales team on 01709 385485 or click here to email (available Monday – Friday 0830 – 1730)  to discuss your required configuration.